Micro I
Obtain handheld spirometry
The Micro I handheld spirometer with high-definition backlit display measures and displays the patient's forced vital capacity. Its portability ideally supports general and private medical practices, outpatient departments, occupational health settings, and heart and lung transplantation units.
Relevant index display
The device measures FEV1, FVC, FEV6, PEF, FEV1/FVC, FEV1/FEV6 and F25-75 ratios.
Compliance modes
The device provides ATS/ERS 2005 quality prompts for each maneuver, and NLHEP configuration mode.
Viewing options
You can view the current or best manuever with predicted value displayed as either % predicted or z score.
Device verification
The spirometer provides a calibration check to verify the device.
Device configuration
PC software helps configure the device.
Battery recharging
The spirometer comes with a rechargeable battery and charger in the carrying case.
Micro I |
|
---|---|
Measurements |
|
|
FEV1, FEV6, FVC, FEV1/FEV6, FEV1/FVC, PEF, FEF25-75, FEF75, FEF25 |
Volume range: |
0.1–8 L (gold standard turbine 0.1–9.99 L) |
Flow range: |
0.2–15 L/s |
Accuracy: |
±3% to ATS recommendations |
Display: |
128 px x 128 px graphic backlit monochrome LCDm |
Battery life: |
Approximately 30 h with a fully charged battery |
Power supply: |
Input: 100–240 VAC 50–60 Hz 0.5A |
Dimensions: |
6.4" x 2.4" x 1.2" (162 cm x 61 cm x 30 cm) |
Weight: |
0.33 lb (152 g) |
Operating temperature: |
The instrument operates in a uniform environment of 10–35 °C, out of direct sunlight |
Operating humidity: |
20–80% RH |
Storage temperature: |
-20–+70 °C |
Storage humidity: |
30–90% RH |
Requirements: |
An IBM-compatible PC, with hardware that meets or exceeds the following minimum requirements: |
PC configuration |
|
Processor: |
800 MHz or more |
RAM: |
256 MB |
Free disk space: |
50 MB |
USB port: |
At least one free |
Operating system: |
Windows® XP, Windows Vista 32 bit, Windows Vista 64 bit, Windows Server 2003 or Windows Server 2008 |